JP50, JP75 and JP90: Compare the Hose Reel Range
Compare the eight listed models by PE hose size, length and rewind drive before requesting a model recommendation.
The SECOSETH catalogue contains eight hose reel irrigator models. Use the table as a starting point for comparing the listed hose and rewind configurations, then check the full product specification for your project.
01 Read the range at a glance
| Model | PE hose | Rewind drive |
|---|---|---|
| JP50-200 | 50 mm / 200 m | Water turbine |
| जेपी75-300 | 75 mm / 300 m | Water turbine |
| JP75-300DK | 75 mm / 300 m | Motor |
| जेपी75-400 | 75 mm / 400 m | Water turbine |
| जेपी75-500 | 75 mm / 500 m | Water turbine |
| JP90-300 | 90 mm / 300 m | Water turbine |
| JP90-300DK | 90 mm / 300 m | Motor |
| JP90-400 | 90 mm / 400 m | Water turbine |
02 Understand the configuration differences
JP50-200 is listed with a 50 mm PE hose and a 200 m hose length. The JP75 group uses a 75 mm hose with listed lengths from 300 m to 500 m. The JP90 group uses a 90 mm hose with 300 m or 400 m listed lengths. A longer hose is not automatically the right choice for a particular field.
03 Confirm the rewind drive
The JP75-300DK and JP90-300DK entries specify a motor rewind drive. The other six listed models specify a water-turbine rewind drive. Ask for the model-specific drive, power and operating requirements when comparing alternatives. Do not assume that equipment with the same hose length has the same requirements.
04 Compare against your project data
- Field length, width and working positions
- Water source, flow and pressure
- Crop and preferred sprinkler arrangement
- Drive preference, quantity and destination
Open the hose reel irrigator catalogue for individual models, or send your field information through the selection guide.
Continue Reading
Explore more guides on hose reel irrigators and model selection.
Let’s discuss your irrigation project.
Tell us about your field, water source and project requirements.